Using an Automatic
programme
For optimum results, we recommend
using the dishes and quantities
specified in the recipes.
For Automatic programmes without
pre-heating, food should be placed
straight in the oven on shelf level 2.
A With Automatic programmes, have a
container with the amount of water
specified in the recipe ready.
B Select Automatic c.
ai
AIwill appear in the display.
C Turn the rotary selector until the
number of the Automatic programme
you want to use appears in the
display.
D Touch the OK sensor.
The required programme has now been
selected.
With some meat programmes you will
now be prompted to enter a weight:
i200
g
}
;
E Use the rotary selector to enter the
weight.
F Touch the OK sensor.
The prompt to draw in water then
appears:
?
;
G Open the appliance door.
H Pull the intake tube forwards (located
below the control panel on the left).
I Immerse the end of the water intake
pipe in the container with tap water.
J Touch the OK sensor.
The water intake process will begin and
you will hear the pump.
Automatic programmes
64
To Next Page
Loading...
