Miele WWB 020 - Starting a program; Initiating a wash cycle

5. Starting a program
26
Starting a program
 Touch the flashing Start/Stopsensor
button.
The door will lock and the program will
start.
– As long as the symbol is flashing
on the control panel, you can add
laundry.
– When the symbol lights up
constantly, the door is locked until
the end of the program.
If a Delay start time has been selected,
this will count down on the time display.
At the end of the Delay start time or
immediately after the program has
started, the program duration will
appear in the time display.
Energy savings
After 10minutes, the indicators dim.
The Start/Stopsensor button will flash
slowly.
You can reactivate the indicators:
 Touch the Start/Stopsensor button
(this does not have any effect on a
running program).