Miele WWB 020 - Delay start; Setting a delayed start time

Delay start
30
With Delay start, you can delay the start
of a program from 30minutes up to a
maximum of 24hours. This allows you
to make use of night-time economy
electricity rates, for example.
Selecting Delay start
Delay start cannot be selected in the
Drain/Spin or Proofing programs.
 Select the program required.
 Touch the sensor button.
The sensor button lights up brightly.
 Touch the orsensor button
repeatedly until the required Delay
start time appears on the time
display.
– In the case of settings below
10hours, the Delay start time
changes in increments of 30minutes
– In the case of settings above
10hours, the Delay start time
changes in increments of 1hour
Starting Delay start
 Touch the flashing Start/Stopsensor
button.
The Delay start process starts and
counts down on the time display.
Altering Delay start
 Touch the Start/Stopsensor button.
The Delay start process stops and the
symbol on the control panel goes
out.
 Touch the orsensor button
repeatedly until the required Delay
start time appears on the time
display.
 Touch the flashing Start/Stopsensor
button.
Cancelling Delay start
 Touch the Start/Stopsensor button.
The Delay start process stops and the
symbol on the control panel goes
out.
 Touch the brightly lit sensor
button.
Delay start is cancelled and the
sensor button goes out. The
program duration appears on the time
display.
 Touch the flashing Start/Stopsensor
button in order to start the wash
program.