Installation and connection
60
Risk of injury from sharp edges.
There is a risk of injury from reaching
into holes that are not covered.
Cover the holes for the shipping
struts after they have been removed.
Install the covers onto the holes.
Secure the shipping struts to the
back of the washing machine. Make
sure that the top catch is located
above the holder.
Risk of damage from incorrect
transport.
The washing machine may become
damaged if moved without the
shipping struts in place.
Keep the struts in a safe place.
Install them again if the machine is to
be moved (e.g. when moving to a
new house).
Refitting the transit bars
Refitting is carried out by reversing the
procedure.
To Next Page
