Miele WWB 020 - Memory; Water Inlet

Programmable functions
73
Memory
The washing machine will save the
last settings (temperature, spin speed,
and some of the Options) selected for
a program after the program has
started.
When the program is chosen again, the
saved settings will appear in the
display.
Options
 = Memory is switched off
(factory default setting)
 = Memory is switched on
Water inlet
You can program 2 options for the
water inlet. The water inlet is
controlled by the two inlet hoses.
Options
 = Cold water
The washing machine will be
operated with cold water only.
 = Hot water (factory default
setting)
Hot water is used in the main
wash.
 Damage caused by incorrect
water connection.
Connection to a hot water supply
only is not permitted. When being
operated with hot water, the washing
machine always requires a cold
water connection as well in order to
control the temperature of the water
used for washing the laundry.
The washing machine must always
be connected to cold water.