Miele WWB 020 - PIN Code; Control Panel Switch-Off Status

Programmable functions
72
PIN code
The PIN code prevents the washing
machine being used without your
knowledge.
When the PIN code has been activated,
you have to enter it after switching the
washing machine on. Otherwise, the
washing machine cannot be operated.
Options
 = PIN code is switched off
(factory default setting)
 = PIN code is switched on
Using the washing machine with a
PIN code
The code is 125 and cannot be altered.
 Switch on the washing machine.
  appears on the time display and
theandsensor buttons light up.
 Touch the sensor button.
 appears on the time display.
 Confirm the number with the Start/
Stopsensor button.
The first number has been saved and
you can now enter the second number
using theandsensor buttons.
 Enter the second and third numbers
and confirm the numbers with the
Start/Stopsensor button.
The lock is released and a wash
program can now be selected and
started.
Control panel
switch-off status
To save energy, the time display and
sensor buttons will go out after
10minutes, and only the Start/
Stopsensor button will flash.
Options
 = Off
The time display and sensor
buttons will remain lit up while
the washing machine is
switched on
 = On (factory default setting)
The time display and sensor
buttons will switch off after
10minutes if the program is
started.
However, the time display and
sensor buttons will remain lit
up for 10minutes after a Delay
start time has elapsed, after
the end of a program, or at the
end of the Anti-crease phase.