19
PRODUCT PROGRAMME
FLEX
2
3000 Compact:
300A welding machine for MMA and MIG/MAG
welding. The machine is air-cooled and is supplied
with integrated trolley and built-in wire feed unit with
4-roll drive.
Welding hoses and cables
MIGATRONIC’s product range can provide electrode
holders, MIG/MAG torches and hoses, return current
cables, intermediary cables and wear parts etc.
Push pull (option)
FLEX
2
3000 Compact can be retrofitted with extra
equipment; thereby a MIGATRONIC Push Pull torch
can be connected and used.
Torch cooling (option)
When ordering the machine, an integrated cooling
module can be ordered, which enables both water-
cooled and gas-cooled welding torches to be used.
Trolley with unit for changable voltage (option)
A trolley with a built-in unit which automatically adjusts
the actual three-phased mains voltage (230-500V) to
the FLEX
2
3000 Compact.
Intelligent Gas Control (option)
Gas saving kit, which automatically adjusts the gas
flow.
Accessories
Please contact your Migatronic dealer for further
information on FLEX
2
3000 Compact accessories.
To Next Page
Loading...
