25
Lock function (Option)
It is possible to select the requested lock level by
pressing the following key pad in the Machine Setup-
menu:
Functions are locked to the selected lock level by
inserting the SD-lock-card and unlocked by reinserting
the SD lock-card.
Recall of factory settings
This results in a total reset to factory settings:
Display of licenses
It is possible to get a complete overview of the number
of licenses:
Display of software versions/licence number
Software versions/licence number can be displayed by
pressing the following key pad in the service menu:
Licence number is used for purchase of additional
licences. It is important to state the correct number by
placement of order and to differ between numbers,
small and capital letters.
To Next Page
Loading...
