Mikado LOGO 200 - 1.4 Main Frame - Lower Frame Mounting

1.4 Main Frame - Lower Frame Mounting
2 x
1 x
1 x
1 x
1 x
4 x
4 x
2 x 6 Screw
1.6 x 4
M1.6 x 3
M2x4
M2x6
M2x12
M2x14
2 x
M2 washer
M1.6x3
M1.6x3
M2x4
M2x6
1.6x4
1.6x4
2 x 6 screw
M2x12
M2x14
M2 Washer
M2 Washer
2 x 6 screw
The rear carbon
pieces connect
the lower frame to
the upper frame.
The carbon will
bend, and this is
nomral
Leave these 2 x
clamping bolts
loose until the
boom is mounted
Manual Logo 200 - ©Mikado Model Helicopters - Page 6