Manual LOGO 690SX - ©Mikado Model Helicopters GmbH - Page 3
14x M2,5
3x
SW5x59
2x 3x17
4x
3x5x2,5
10x M2,5x10
4x M3x10
4x
M2,5x16
4x
M2,5x12
31
10x19x5
M2,5x16 (4x)
3x7x3
3x17
M2,5x12
M2,5x12
M3x10
M3x10
Using the rod M2.5x60 from bag 7, position all
14 nylon nuts in the right side frame.
Before you combine the two sides of the main
frame, attach the two belt tensioners (#4089,
bag 6).
1 Mainframe
Bag 1
Bag 1
All parts shown in the boxes are displayed in real size.
You should position the motor pinion
on the motor shaft, before you mount
the motor plate. You may also mount
the motor pinion at a later stage, but
the process will be more cumber-
some. For reading on how to mount
the motor pinion, please ip to page 9.
To Next Page
Loading...
