Mikra M15 - Parameter Lock Control; Locking and Unlocking Parameters

13
Parameter Lock And Open
Description: Needless function can open or close, to prevent client operation
unsuitable to cause the fault.
Step 1. Select single mode LED lamp off
Step 2. Press
target value display ”PASS” blinking,
current value display: _ _ _ _ blinking
Step 3. Press
into the on/off set parameter.
Note: Press or ※
(dir/ OriGin/ FAULt/ inPos)
Step 4. Press setting on/off
Example: Frame display “dir off” indicate ±direction
parameter open.
Frame display: “dir on” indicate ±direction
Parameter close.
Press to setting and exit.
PROG
3
0
F
0 1 2 2
9
8
on
dir
100.00
100.00
_ _ _ _
PASS
on
dir