Mikra M15 - Pre-Set Program Management; Pre-Set Program Execution

4
Pre-Set Program (10 sets)
Description: Pre-set program 10 sets, enter program # 0~9 to execute.
Example: Program 1=10mm, Program 2=20.00mm.
Step1. Press
select enter a key (0-9, total of 10sets).
Note: Be sure in manual mode.※
Step2. (Enter program 1=10mm), press
more press .
Step3. Target value display: ProG＿ at present,
enter program 2=20.00mm, press to
exit.
1
10
ProG
1
ProG
ProG
F
5 5
1
0