16
Installation Guide
＊The magnetic tape consists of three components:
L
A. A magnetized, highly flexible synthetic tape.
B. Flexible steel tape. A and B are already factory-bonded.
C. To keep the flexibility for transport and installation, the third part, also a steel tape is
delivered separately. It serves for mechanical protection of the synthetic tape and
must be stuck on the magnetic synthetic tape after installation.
Installation:
a. There components of tape: depth:1.8mm, width:10mm.
b. Ensure to apply tape on clean, dry and plain surface.
c. Be sure the tape adhesion on surface.
d. Please apply the tape with ambient temperature: 21~38℃
e. We recommend to make a chamfer on the machine to install the tape.
f. If cut a edge can stable the tape.
Height
10 mm Width
Ａ
Ｂ
Ｃ
Mounting side
Sensor side
1. 8 mm
To Next Page
Loading...