Mikra M15 - Cable and Sensor Placement

17
Gap (sensor - tape)
11.2
25
4
3.5
10
6
4
Cable:
• Distance more than diameter 50mm.
• Must be away from inductive and capacitive interference source as conductor, relays,
motors, switch power pack clocked controllers, etc
• Must be kept a distance to interference sources.
Sensor:
• Allow some fault when install the sensor.
• Attend the position when install the sensor.
< +/- 5° < +/- 5°
Gap
2.5 mm max.
+/- 1 mm
Magnetic tape
< +/- 1.5°
Recommend Gap between tape and sensor: 1mm Unit: mm
15
sensor