Need help?Do you have a question about the Mikra M15 and is the answer not in the manual?
General| Brand | Mikra |
|---|---|
| Model | M15 |
| Category | Controller |
| Language | English |
Describes the function and display content of the upper and lower windows on the M15 unit.
Explains the purpose of each button, LED, and indicator on the M15's operation panel.
Step-by-step guide on operating the machine table in manual mode using the device keys for movement.
Guide on setting and executing auto-positioning sequences using the single mode function.
Instructions on entering and executing preset target values for programmed operations.
Steps to execute predefined target values quickly using the number keys on the panel.
Procedure for making small adjustments to the target value using the +/- keys.
Procedure to set the current reading to match the actual workpiece measurement.
Demonstrates how to verify and display the newly set datum values.
Steps to configure the counting direction parameter for sensor input.
Guide to choose the desired measurement resolution from available options.
Steps to perform sensor calibration, including gap setting and initial checks.
Common issues and solutions encountered during the sensor calibration process.
Steps for accessing and modifying device parameters for specific applications.
Detailed table of M15 parameters, their codes, descriptions, and default values.
Instructions on how to enable or disable parameter protection to prevent accidental modifications.
Addresses typical operational issues like sensor errors, motion direction, and motor faults.
Solutions for specific error messages and battery status indicators.
Details the three components that make up the magnetic tape system.
Steps for properly applying the magnetic tape to the machine surface.
Recommendations for sensor placement and cable management for optimal performance.
Details on the device's power input specifications and battery type.
Diagrams and descriptions for connecting external devices to the input and output ports.
Illustrations showing the external size and required mounting hole dimensions.
To Next Page