Mikra M15 - Error Code Solutions

15
Lo Err
5. Possible Cause: Current value over soft low and high
(F10、F11)
Note: Frame show Lo/Hi※
Excluding: a. Check machine table whether over the
travel.
b. Press LED blinking
press or to exit.
c. Please reload origin datum values refer
to page8.
6. Possible Cause: Indicates battery discharged
Excluding: a. Power off
b. Change the battery(1.5V * 1 tape)
c. Turn the power on again
d. Please reload origin datum values refer
to page8.(If current value lose)
7. Possible Cause: Waiting for enter target value
Excluding: a. Enter new target value
b. Press to exit
8. Possible Cause: In the parameter setting value
Note: Frame show F/origin※
Excluding: Press
C H A n G E
bAtt
100.00
100.00
F
100.00
9
8