5
Program Open and Lock (10 sets)
Description: Don’t needs pre-set program, to start or close.
Example: Program 1=10.00mm for , program 2= 20.00mm for ,
~ other a key, don’t setting pre-set program, to stop follow
steps as below:
Step1. Press
target value display: ProG_ .
Note: Be sure in single mode.※
Step2. Press
current value display:_ _ _ _ _ _, closed,
frame display, started.
Step3. Press to close
※Note: To close other keys, follow the step 2, 3.
0
1
9 2
５
５５
５
５
５５
５
F
2
STOP
2
2
2
To Next Page
Loading...
Need help?
General