Mikra M15 - Fast Program Functionality; Fast Program Usage; Fine Adjustment Control; Fine Adjustment Procedure

6
START
Fast Program
Description: To facilitate frequently used positions, the keys 0 to 9 have associated
preset target values. And the positioning can be started immediately.
Example: Program 1=10.00mm, program 2=20.00mm. Execute program 2 as below:
Step1. Select singe mode LED lamp off.
Step2. Press target value display: 20.00mm
LED blinking, to waitting start.
※Note: Execute program1 press#1.
Fine Adjustment
Description: Increase and decrease to reach fine adjustment.
Example: M15 target value display100.78mm, increase/ decrease target value0.25mm,
setting steps as below:
Step1. Increase target value: press
display 0.00 LED blinking,
decrease: press twice,
display-0.00 LED blinking.
Step2. Press
press to completed.
※Note: Target value display: 101.03mm, current value
display:100.78mm for target value increase
0.25mm.
2
5 0 2
+/-
+/-
100.00
100.00
20.00
100.00
0.00
100.00
100.00
0.25