detection region for the current area. If you choose Advanced Mode (Only for PTZ series), it
supports configuring the detection region for different PTZ presets (Only support Preset 1~4 so
far).
Step4: Set object size limits. The object size limits can refer to Table 4-6-5;
Step5: Set detection schedule;
Step6: Set alarm action. When enabling PTZ Auto Tracking and Loitering Detection, camera will
automatically track objects and trigger an alarm if objects have been loitering in a defined area for
more than the Min. Loitering Time;
Step5: Set alarm settings. If you enable External Output and choose Constant External Output
Action Time, when objects loiter in the selected regions, External Output Action alarm time will be
always constant till the alarm is released.
Note:
After setting minimum loitering time from 3s to 1800s, any objects loitering in the selected area
To Next Page
Loading...
