Set / Call a patrol
A patrol is a memorized series of preset function. It can be configured and called on the patrol
setting list. You can customize up to 8 patrols and it can be configured with 48 presets. Before
configuring the patrol, you should make sure that the presets you want to add to the patrol have
been defined.
Set a patrol:
Step1: In the PTZ control panel, click to enter the patrol settings interface;
Step2: Select a patrol number, the setting icon will appear , click it;
Step3: Click to add presets to this patrol, as shown in Figure 4-1-5;
Step4: Configure the preset number, patrol speed and patrol time;
Table 4-1-3 Description of Patrol Settings
The speed of moving from one preset to another.
To Next Page
Loading...
