Milesight MS-C5341-X30PC - Page 55

49
Alarm Snapshot File
Name
Default(YYYY-MM-DD) /MM-DD-YYYY/ DD-MM-YYYY/ Add prefix/ Overwrite with
the base file name/ Customize are available.
Timing Snapshot File
Name
Default(YYYY-MM-DD) /MM-DD-YYYY/ DD-MM-YYYY/ Add prefix/ Overwrite with
the base file name/ Customize are available.
Note: You can refer to the following file name tip to customize the file name.
FTP
Alarm video files can be sent to specific FTP server. You must configure the FTP settings correctly
before using it.
Table 4-4-14 Description of the buttons
Parameters
Function Introduction
Server Address
FTP server address
Server Port
The port of the FTP server. Generally it is 21