Miller Insight Core 301072 User Manual

OM-260430 Page 11
OM-260430 Page 11
Use ONLY with compatible
power sources or equipment
damage may occur.
• Do not use with Dynasty, Maxstar, or
Syncrowave power sources.
• Read Owner’s Manual to check
compatibility.
267353-A
Utiliser des sources de courant
compatibles SEULEMENT,
sinon un bris d'équipement
pourrait survenir.
• Ne pas utiliser avec les sources de
courant DYNASTY, MAXSTAR ou
SYNCROWAVE.
• Lire le manuel d'opérateur pour vérifier
la compatibilité.
AVIS
NOTICE
Ref. 267353-A
4-4. Environmental Specifications
A. IP Rating
IP Rating
IP21
This equipment is designed for indoor use and is not intended to be used or stored outside.
IP21 2014 06
B. Information On Electromagnetic Field (EMF)
! This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974 1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner’s Manuals for all components of the welding circuit for additional EMF exposure
information.

The EMF assessment on this equipment was conducted at 0.5 meter.

At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
ce-emf 1 2010-10
C. Information On Electromagnetic Compatibility (EMC)
! This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
ce-emc 3 2014-07
3-4. Environmental Specifications
A. IP Rating
IP Rating
IP21
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Information On Electromagnetic Compatibility (EMC)
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public
low-voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations,
due to conducted as well as radiated disturbances.

Miller Insight Core 301072 Specifications

General

Brand	Miller
Model	Insight Core 301072
Category	Control Unit
Language	English