OM-260430 Page 35
4-9. Determining Device Serial Number And License Key
F
Obtaining device serial number and license key is necessary for product registration. The USB drive used in Section 4-8 now contains a
.txt file that is needed to obtain the license key.
1. Remove USB drive from Insight Core unit and insert into computer. Allow time for computer to recognize the USB drive.
2. Find and open the folder named Device License Keys on the USB drive.
Figure 4-27. Device License Keys Folder
3. With a text editor (i.e. Notepad), open the .txt file called IP_MAC_ADDR_LIC… associated with the unit’s serial number you would like to
register in order to obtain the activation key needed to register the device.
Figure 4-28. Device License Key File
4. Write down the serial number and license key for registration.
Figure 4-29. Device License Key Information
F
This file also verifies the connection information. Exact information in the file will vary based on connection type and device.
F
To continue device registration, proceed to Section 4-10.
To Next Page
Loading...
Need help?
General