Miller Invision 352 MPa Auto-Line User Manual

 A complete Parts List is available at www.MillerWelds.com
OM-246193 Page 31
7-5. Pulsed MIG - Wire and Gas Selection Table
WIRE TYPES** GAS TYPES
Steel
.035 (0.9) STL
.045 (1.2) STL
ARGN CO2 (ARGON / CARBON DIOXIDE)
80 ARGN CO2 (ARGON / CARBON DIOXIDE)
ARGN OXY (ARGON / OXYGEN)
Steel 100S
.035 (0.9) STL
.045 (1.2) STL
100S C5 (95 ARGON / 5 CARBON DIOXIDE)
Metal Core
.045 (1.2) MCOR
.052 (1.4) MCOR
ARGN CO2 (ARGON / CARBON DIOXIDE)
Stainless Steel
.035 (0.9) SSTL
.045 (1.2) SSTL
TRI MIX (TRI-GAS MIXTURE)
ARGN OXY (ARGON / OXYGEN)
ARGN CO2 (ARGON / CARBON DIOXIDE)
Aluminum
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
ARGN (ARGON)
.035 (0.9) AL49 (4943)
.040 (1.0) AL49 (4943)
3/64 (1.2) AL49 (4943)
1/16 (1.6) AL49 (4943)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
ARGN (ARGON)
HE AR25 (HELIUM/ARGON)
Nickel
.035 (0.9) NI
.045 (1.2) NI
ARGN HE (ARGON / HELIUM)
ARGN (ARGON)
Copper Nickel
.035 (0.9) CUNI
.045 (1.2) CUNI
HE ARGN (HELIUM / ARGON)
Silicon Bronze
.035 (0.9) SIBR
.045 (1.2) SIBR
ARGN (ARGON)
Titanium
.035 (0.9) TI-5
.045 (1.2) TI-5
ARGN HE25 (75 ARGON / 25 HELIUM)
.035 (0.9) TI-5
.045 (1.2) TI-5
ARGN HE50 (50 ARGON / 50 HELIUM)
**Wire diameter in inches (mm). Refer to section 6-2 to change displayed units.
 Other normal gas mixtures can be used by adjusting arc length and sharp arc. Use the program closest to your gas mixture and wire type
and size.
Notes

Miller Invision 352 MPa Auto-Line Specifications

General

Brand	Miller
Model	Invision 352 MPa Auto-Line
Category	Welding System
Language	English