Miller Spectrum 2050 User Manual

OM-2228 Page 13
4-4. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-5. Selecting a Location
loc_2 3/96 - Ref. 151 556 / 802 183
1 Lifting Handles
Use handles to lift unit.
2 Hand Cart
Use cart or similar device to move
unit.
3 Line Disconnect Device
Locate unit near correct input
power supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
24 in.
(610 mm)
17 in.
(432 mm)
12-1/2 in.
(318 mm)
Movement
1
1
2
! Do not move or operate unit
where it could tip.
Location
3
Dimensions And Weight
18 in.
(460 mm)
18 in.
(460 mm)
70 lb (31.8 kg)

Miller Spectrum 2050 Specifications

General

Input Voltage	208/230/460 V
Weight	70 lbs (31.8 kg)
Dimensions	20.5 in. x 12.5 in. x 13.5 in.
Duty Cycle	60% at 55 Amps
Input Phase	1-Phase
Input Hz	50/60 Hz
Input Power	208/230/460 V
Processes	Plasma Cutting