Millipore 8003 - Unpacking the System

13Stirred Ultraltration Cells
Unpacking the System
Place cell on a level surface and remove packing
inserts. Turn the pressure relief valve knob to the hori-
zontal position. Hold the body and push the cap down.
Slide the cell out of the retaining stand and remove the
cap assembly with a twisting motion. Pull out the stirrer
assembly and discard packing. Unscrew the base and
remove the membrane holder. Remove the O-ring from
the membrane holder.
99228_RevM.indd 13 8/7/2008 3:10:17 PM