Millipore 8003 - Specifications; Materials of Construction

24 www.millipore.com
Specications
Model No. 8003 8010 8050 8200 8400
Cell capacity (mL) 3 10 50 200 400
Minimum process
volume (mL)
0.075 1.0 2.5 5.0 10.0
Membrane diam. (mm) 25 25 44.5 63.5 76
Effective membrane
area (cm
2
)
0.9 4.1 13.4 28.7 41.8
Hold-up volume
1
(mL) 0.07 0.2 0.5 1.2 1.5
Empty weight,
approx. (g)
130 130 220 360 610
Retaining stand base
dimensions (cm)
6 × 6 6 × 6 7 × 7 9 × 9 11 × 11
Retaining stand
height (cm)
7.7 7.7 9.8 12.8 15.5
Maximum operating pressure: 75 psi (5.3 kg/cm
2
)
Relief valve setting: 90 psi (6.3 kg/cm
2
)
Maximum dialtration operating pressure: 55 psi (3.9 kg/cm
2
)
1
Non-recoverable volume (below membrane surface)
Materials of Construction
Cap: nylon
Membrane holder: polysulfone
Body: polysulfone
Magnetic stirrer assembly: acetal, polysulfone
Retaining stand: nylon
O-rings: silicone rubber (red), buna-N copolymer (black)
Tube tting assembly: nylon
99228_RevM.indd 24 8/7/2008 3:10:19 PM