Millipore 8003 - Page 31

27Stirred Ultraltration Cells
Product Ordering Information,
continued
Replacement Parts Use the following table to determine which replacement kit to order. Refer to ultraltration cell assembly diagrams on pages 2–11 for letter designations. The parts contained in each kit are listed on pages 28—29. Description Item 8003 8010 8050 8200 8400
Cap A,B 8003SCPKIT 8010SCPKIT 8050SCPKIT 8200SCPKIT 8400SCPKIT
O-ring C 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT
Stirrer assembly
D 8003SCPKIT 8010SCPKIT 8050SCPKIT 8200SCPKIT 8400SCPKIT
Body E N/A (5125) N/A (5121) N/A (5122) N/A (5123) N/A (5124)
O-ring F 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT
Membrane Holder
H 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT
Elastomeric tubing
I Fisher cat. no. 14-169-1C [Saint Gobain
®
Tygon
®
R-3603,
I.D. 3/32 (2.4 mm), O.D. 5/32 in. (4mm)]
Base J 8003SCPKIT 8010SCPKIT 8050SCPKIT 8200SCPKIT 8400SCPKIT
Tube Fitting assembly
K 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT
Tubing, plastic
L
8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT 8000SCPKIT
Stand M N/A (5125) N/A (5121) N/A (5122) N/A (5123) N/A (5124)
O-ring N 8000SCPKIT — — — —
99228_RevM.indd 27 8/7/2008 3:10:19 PM