Millipore Labscale - Labscale Stir Base

Labscale Tangential Flow Filtration System User Guide 11
Labscale Stir Base
A magnetic stirrer is installed inside the base housing. A stir bar is
packed with the Labscale Stir Base unit. The speed control knob
for the stirrer is located on the front of the stir base.
1 Stir Bar
120 V
230V GB
230V
2 Thumbscrews
1 Operating
Manual
1 Stir Bar
120 V
230V GB
230V
2 Thumbscrews
1 Operating
Manual
Figure 4: Labscale Stir Base
Assembly No. 29755
1 Stir Bar
120 V
230V GB
230V
2 Thumbscrews
1 Operating
Manual
Figure 4b:Labscale Stir
Base Accessories
Figure 4c:AC Adapter Assembly No.
29209, (120V), 29781 (230V), 29913
(230V GB)