Millipore Milli-Q Direct 8 System User Manual

Rinsing the RO Cartridges
Rinse the RO
Cartridges
The RO Cartridges must be flushed and rinsed when the Milli-Q System is
installed.
Failure to do this results in poor water quality.
Procedure
Follow the steps below to flush and rinse the RO Cartridge(s).
Step Action Diagram
1 Start in STANDBY Mode.
2
 Select Menu.
 Press .
3
 Select Maintenance.
 Press .
4
 Select Install new RO.
 Press .
Continued on next page
- 30 -

Millipore Milli-Q Direct 8 System Specifications

General

Brand	Millipore
Model	Milli-Q Direct 8 System
Category	Water Filtration Systems
Language	English