Page 70 MiniRanger Plus 7ML19981CJ01
Parameter Description
P910 Relay
Tests the alarm relays.
entry:
0 = de-energizes selected relay
1 = energizes selected relay
P911 mA Output Value
Displays the value from the previous measurement. A test value can be
entered and the displayed value is transmitted to the output. Upon returning
to the run mode, the parameter assumes the actual mA output level.
P920 Reading Measurement
The reading as viewed in the run mode.
Note:
Not accessible via application device keypad
P999 Master Reset
Resets parameters to their factory setting.
Press
To Next Page
Loading...
