Milltronics MultiRanger Plus - Volume, OCM, and Calibration Parameters (P-34 to P-67)

Parameters P-34 through P-39 are used for volume and display conversion.
P-34 tank shape for volumetric conversion
enter: 0 = non volume - linear level measurement ( F )
1 = flat bottom
2 = conic or
pyramidic bottom
3 = parabolic bottom
or
4 = half sphere bottom
5 = flat slope bottom
6 = horizontal cylinder,
flat ends
7 = horizontal cylinder,
parabolic ends
8 = sphere
( cont’d )
PL-443 7 – 7