Tag Guidelines for the Models Listed Below
PELLERIN MILNOR CORPORATION
Display or Action Explanation
B2TAG94118: Do not strike shipping container during fork-
lifting. Fragile components inside.
B2T2001013: Hot water connection.
B2T2001014: Cold water connection.
B2T2001015: Reuse (third) water connection.
B2T2001028: Look for tags inside the machine. These tags may
identify shipping restraints to be removed or components to be
installed. Do not start the machine until these actions are
completed.
B2T2002013: Do not start the machine until shipping restraints
are removed. This tag will appear on the outside of the machine
to alert you to the presence of internal shipping restraints. A tag
will also appear on the restraint to help identify it. Most, but not
all shipping restraints display the color red. Some shipping
restraints are also safety stands. Do not discard these.
B2T2003001: Hold the side of the connection stationary with a
wrench as you tighten the connection with another wrench.
Otherwise, you
may twist components, such as valves, damaging
them.
16
To Next Page
Loading...
