Milnor 48040F7D - Safety Supports: 48040 F_ Air-Tilt Washer-Extractors

PELLERIN MILNOR CORPORATION
BIIFLM18 (Published) Book specs- Dates: 20090331 / 20090917 / 20090917 Lang: ENG01 Applic: IFL
Safety Supports: 48040F_ Air-tilt Washer-extractors
This document uses Simplified Technical English.
Learn more at http://www.asd-ste100.org.
Milnor supplies safety supports with this machine.This document shows the safety supports,
identifies the safety support components, and tells how to install them.
1. Safety Support Component Identification
Figure 1: Safety Supports: 48040F_ Air-tilt Washer-extractors
Detailed view Legend
.
A. Safety Stand. Used in two
front locations or two rear
locations.
B. Wheel. Used in four
locations.
C. Cradle. Used in four
locations.
12