MIMAKI CF-1215 - Page 76

4 Select the tool to be used.
RecCutter 1
RecCutter 2
5 Enter the input values.
Press the
END
key to enter the input
values.
If you do not enter the input data, press
the
C E
key.
< TOOL SELECT > 1 / 1
HEAD B >
TOOL RecCutter 2 >
< TOOL SELECT > 1 / 1
HEAD B >
TOOL RecCutter 1 >
[ LOCAL ] 1 / 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
END
F2
+