MIMAKI CJV150 series - Periodic Check Items

© 2014 MIMAKI ENGINEERING CO.,LTD. 4.2.1 P.1
1
2
3
4
R.1.0
4.2.1 Periodic Check Items
 Outline
This section shows the periodical maintenance work items recommended to keep the machine in good condition.
 Periodic Check Items
Item Sub Item Remarks See
Checking the
machine condition

1 Upload of parameters
4.2.2

2 Update of firmware Old Ver.: New Ver.:

3 Checking the result of user's care

a Area around the heads

bStation

c Media holder, platen, etc.

4 Head condition Test drawing:

Head adjustment:  Inclination
 Ink drop position
Regularly replaced
parts

1 Tube Pump Assy
4.2.3

2 Select Path Pump Assy

3 Cap Head Assy

4Wiper Slider

5 Wiper Cleaner Assy

6 CP pad Assy

7 Pressure Damper
Greasing

1 Clamp Lever
4.2.4

2 Clamp Cams

3 Cap Slider
Checking

1 Sensor test
4.2.5

2 Operation test

3 Linear encoder test

4 Replace counter

a Hours of machine use Value: [h]

bDrawing area
Va l ue : [ m
2
]

c Drawing length Value: [m]

d Scan count Va l ue : [ tim e s ]

5 Upload of parameters

6 Checking online drawing
Service Documents > Technical Information > Regular Maintenance > Periodic Check Items
Model CJV150/300 Issued 2014.09.15 Revised F/W ver Remark
1.0
Rev.