© 2014 MIMAKI ENGINEERING CO.,LTD.
1.1 P.3
1.1 Constitution and Rules
1
2
3
4
A-4) Format of Change Tracking
Details
Indicate the heading flow to the section.
Indicate the title of the section. For any document other than
“SERVICE DOCUMENTS”, indicate the name of the
document in front of Change Tracking.
Example: Indicate “Change Tracking” for “SERVICE
DOCUMENTS” or “Maintenance Manual Change Tracking”
for “MAINTENANCE MANUAL”.
Enter the date of change in the “Date” field in the yyyy/mm/dd
format.
Enter the version of the revised document in the “Manual Ver.”
field.
Enter additional information such as the related firmware
version and the related serial number in the “Remark” field.
Enter the change status in the “Status” field.
Released:A new version is issued when a major change, such as
change in specifications, takes place.
Example: 1.00 2.00
Revised: The correction of the document takes place.
Example: Correction or addition of explanatory text
and/or names of parts, or modification to and/or
addition of drawings.
Erased: Descriptions of work or functions are deleted because
of specification change or firmware upgrade.
Added: Descriptions of work or functions are newly added
because of specification change or firmware upgrade.
Indicate the section number of the changed section in the
“Index” field.
Indicate the revision number of the changed section in the
“Rev.” field.
Describe detailed information of the change, such as the
location of change, reason and purpose, in the “Changes” field.
Prepare an independent list for Change Tracking for every
version of the document. Locate the Change Tracking list for
the latest version at the top. ( )
* Replace this cover by each user at the case of item revision or
document version updated.
R.1.0
Service Documents > Constitution and Rules
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver
Remark
1.0
To Next Page
Loading...
