9
8
Return the wiper to its original position.
• Insert the wiper by holding both the ends.
9
Clean the cap rubber and cap rubber cover.
• Wipe off any ink on the cap rubber and the cap rubber cover using a clean stick soaked in washing
liquid.
Wipe it off properly so that there is no residual washing liquid.
Cap rubber
Cap rubber cover
• Clean the wiper and the bracket until they look like the picture.
• After cleaning, make sure the cap rubber and the mesh inside the cap have not come off.
10
Once the cleaning is complete, press the [ENTER] key.
• After the initial operation, the display returns to Step 1.
To Next Page
Loading...
