What to do if my MIMAKI jV100-160 is not printing?
If your MIMAKI Printer is not printing, make sure the cable is securely connected to the USB 2.0 port or the LAN port. Also, verify the LAN cable type. If an error has occurred, check the message on the display.
Why is printing not possible on my MIMAKI jV100-160 Printer?
To resolve printing issues, ensure the cable is securely connected to the USB 2.0 port or the LAN port. Also, verify the LAN cable type and check the message displayed on the printer's screen.
How to fix vertically uneven color on MIMAKI jV100-160?
To improve vertically uneven color, attach the provided NITOFLON tape to the platen.
What to do if the ink has leaked from my MIMAKI jV100-160 Printer?
If you notice an ink leak, immediately turn off the main power and unplug the power cable.
Why is my MIMAKI Printer not turning on?
Here's what you can try: * Ensure the power plug is securely inserted into the power outlet. * Use the power cable provided with the printer. * Turn on the main power switch. * Turn the power on.
What to do if image defects occur on MIMAKI Printer?
To address image defects: * Remove any paper scraps or debris from areas the print head passes over. * Perform 'Head Cleaning'. * Perform 'Feed Correction'. * Perform 'Wiper Cleaning'. * Perform 'Cap Rubber Cleaning'. * Perform 'Carriage Underside Cleaning'.
What to do if the heater temperature does not rise to the specified value on my MIMAKI jV100-160 Printer?
If the heater temperature isn't reaching the set value: * Set the selector switch according to the power supply voltage. * Ensure you have correctly set the heater temperature.
General| Print Width | 1600 mm |
|---|---|
| Connectivity | USB 2.0, Ethernet |
| Ink Cartridge Capacity | 440 ml |
| Power Requirements | AC 100-240V, 50/60Hz |
| Print Technology | Piezo inkjet |
| Ink Type | Solvent ink |
| Number of Colors | 4 (CMYK) |
| Media Type | Banner, Paper |
| Media Thickness | 1.0 mm or less |
| Interface | USB2.0 / Ethernet |
To Next Page
