2. Maintenance Items and Timing
5
2. Maintenance Items and Timing
Timing Item
At the end of the
work week
Clean the wiper and wiper bracket. "Wiper Cleaning"(P. 7)
Clean the cap rubber. "Cap Cleaning"(P. 8)
Clean the NCU. "NCU Cleaning"(P. 9)
Clean the underside of the carriage. "Carriage Underside Cleaning"(P. 10)
Clean the media sensor. "Media Sensor Cleaning"(P. 13)
Clean the DAS sensor. "Automatic Correction Sensor (DAS) Cleaning"(P. 14)
Clean the media holder. "Media Holder Cleaning"(P. 15)
Clean the ink discharge channel. "Ink Discharge Channel Cleaning"(P. 13)
Clean the platen. "Platen Cleaning"(P. 15)
Clean the cover (exterior). "Cover (Exterior) Cleaning"(P. 16)
Check the waste ink levels in the waste ink tank.
When not used for
more than a week
Clean the wiper and cap and wash the ink discharge channels. After cleaning, store
without turning off the main power supply. "When Not in Use for Extended
Periods"(P. 16)
Periodically Shake the Ink bottle. "Ink Maintenance"(P. 6)
To Next Page
Loading...
