4. Consumable Item Replacement
30
7
Secure the media holder stopper with the screw.
8
Close the maintenance covers.
Media Cutter Replacement
Replace cutters when blades are chipped or blunt.
• Avoid touching the cutter blade. Failure to do so may result in injury.
• Avoid storing this product in locations accessible to children.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Move To Platen Right End ], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
• The carriage can be moved by hand. Move the carriage slowly to a position allowing easy
access for replacing the cutter.
4
Unscrew the screw, then open the carriage cover hatch.
To Next Page
Loading...
