3. Maintenance
15
4
Clean the DAS sensor.
5
Once cleaning is complete, close the maintenance covers, then press the [ENTER] key.
Media Holder Cleaning
• Turn off the main power and unplug the power cable before carrying out maintenance.
Continuing to use the dirty platen will prevent proper feeding of the media. It will also cause dried ink and
attached dust to rub against the head nozzle surface and lead to print defects (e.g., nozzle clogging,
deflection).
• Do not allow liquids to get inside the product. Otherwise there is a risk of failure, electric shock,
or fire.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
Platen Cleaning
• Turn off the main power and unplug the power cable before carrying out maintenance.
To Next Page
Loading...
