MIMAKI jV100-160 - Media Holder Replacement

4. Consumable Item Replacement
28
1
Open the front cover.
2
Raise the clamp lever.
3
Remove the O-ring retaining the pinch rollers.
O-ring
4
Remove the pinch rollers.
Pinch roller
5
Attach new pinch rollers, and secure them using the O-ring.
6
Close the front cover.
Media Holder Replacement
If the media holder becomes deformed and touches the carriage or print head, replace with a new media
holder.
• Turn off the main power and unplug the power cable before replacing the pinch rollers.
1
Open the maintenance covers.