MIMAKI jV100-160 - Print Head Nozzle Washing

3. Maintenance
11
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Move To Maint. Space], then press the [ENTER] key.
• The carriage moves to the maintenance space.
3
Open the maintenance cover.
4
Clean around the print head on the underside of the carriage.
• Wipe off any ink adhering with a clean stick moistened with maintenance liquid.
• Wipe off the maintenance liquid. Make sure none remains.
Clean the print head sides (dark red area)
using a cleaning stick.
Never touch the nozzle
surface!
Clean using a cleaning stick or soft cloth.
• Never touch the print head nozzle surface.
5
Once cleaning is complete, close the maintenance covers, then press the [ENTER] key.
Print Head Nozzle Washing
If printing defects (e.g., nozzle clogging or deflection) remain unresolved even after head cleaning (Head
Cleaning), apply nozzle washing to the print head.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.