3-39
Machine settings
3
Convenient use
Setting confirmation feeding
Set whether media feeding is performed for checking the result after test printing or not
1
Press the key in the local
mode.
2
Select [MACHINE SETUP 2] by pressing
the keys.
3
Press the key twice.
4
Select “ON” by pressing the
keys.
• Proceed to the step 7 when “OFF” is selected.
5
Press the key to set [BACK
FEED].
6
Select ON/OFF by pressing the
keys.
• When the media return feeding is set “ON”, the
media fed by the confirmation feeding is slightly
returned.
• If it is not desirable to return the media, set it to “OFF”.
7
Press the key.
8
Press the key several times to end.
To Next Page
Loading...
