4-39
Other maintenance functions
4
Routine Maintenance
To use sublimation transfer ink with more stable quality
When you print with sublimation transfer ink after you have left this machine, color may change due to color
material settling.
By shaking the ink cartridge or performing ink filling periodically, the status will be improved. (Before per-
forming ink filling, it is necessary to shake the ink cartridge.)
In the firmware version 5.00 and later, when the time to shake the ink cartridge or to perform ink filling has
come, a message (warning preventing color material settling) is displayed to inform you of it.
When the time to shake the ink cartridge has come (
When you use MBIS, it is not displayed.
)
When the time to perform ink filling
• This message is displayed when the machine is in the local mode or when you switch it from
the remote mode to the local mode.
This does not terminate printing or interfere with continue printing, however, as this is not
displayed during remote mode, it is recommended to switch to the local mode by pressing
the key between printings.
To Next Page
Loading...
