MIMAKI JV33-130 User Manual

2-22
Perform test printing with the test pattern for checking white ink
1
In the local mode,
press the key.
2
Press the key to select the
“(WHITE CHK.)”.
3
Press the key.
• Print a test pattern in the following orders.
• In the second line of the screen, remaining time
from the start of printing is displayed.
(1)Print the pattern daubed with black.
(2)Dry the pattern for thirty seconds.
(3)Return the media automatically and print the test pattern.
4
Check the printed test pattern.
• Finish the operations when it is in normal.
• Execute the head cleaning when it is in abnormal. ( P.2-25)
Check before the
test printing
• If a media has been set. P.2-6 • If the origin position has been set.
• If the head gap has been adjusted. P.2-6
TEST DRAW
(FEED DIR. ) <ENT>
TEST PR INT
(WHI TE CHK. ) <ENT>
** TEST DRAW **
Abnormal pattern
Clogged with ink
Normal pattern
Nozzles are dirty

MIMAKI JV33-130 Specifications

General

Print Technology	Piezo inkjet
Ink Type	Solvent ink
Number of Print Heads	2
Connectivity	USB, Ethernet
Power Requirements	AC 100-240 V, 50/60 Hz
Media Types	Vinyl, banner, canvas
Ink Colors	C, M, Y, K, LC, LM