4-44
Replacing waste ink tank
When the right message is displayed, check the waste ink tank
immediately, and then replace it according to the condition.
1
Remove the waste ink tank guard.
(1) Lift the waste ink tank guard then release a lock.
(2) Open the waste ink tank guard frontward.
2
Pull it frontward to remove by holding
the waste ink tank handle.
• Put a cap on the waste ink tank removed.
3
Replace the waste ink tank.
(1) Prepare a new waste ink tank (SPC-0117).
(2) Insert the waste ink tank by holding a handle of
the tank.
To Next Page
Loading...
