4. Consumable Item Replacement
24
9
Close the front cover, then turn on the power.
• Check to confirm that the carriage returns to the station.
Exhaust Fan Filter Replacement
Check the exhaust fan filter condition. Replace if very dirty.
1
Remove the exhaust fan box.
• Push the tabs at the front to remove the exhaust fan box.
• Replace the very dirty exhaust fan box with new one.
2
Mount a new exhaust fan filter in the exhaust fan box.
• Press the exhaust fan filter into the space under the tabs of the exhaust fan box.
Exhaust fan box
Exhaust fan filter
3
Mount the exhaust fan box.
• Insert the tabs of the exhaust fan box into the slits of the machine, and clip in the tabs at the front.
Blowing Fan Filter Replacement
Replace the blowing fan filter if it is dirty.
If sublimation transfer ink is used
• Replace the filter every three months.
• Turn off the main power supply and unplug the power cable before replacing the pinch rollers.
To Next Page
Loading...
Need help?
General
