MIMAKI JV330 Series Care And Maintenance

4. Consumable Item Replacement
38
9
Press the [ENTER] key.
• The waste ink level will be reset.
About the Media Cutter (CJV)
Replace cutters when blades are chipped or blunt.
To order replacement consumable items, contact your local dealer or our service office. For more information
on consumable items, refer to our website. https://mimaki.com/supply/inkjet.html
• Avoid touching the cutter blade. Failure to do so may result in injury.
• Do not shake or swing the cutter holder. Doing so may cause the blade to come off.
• Avoid storing this product in locations accessible to children.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
l
Replacing Cutters
Installing Cutting Tools
Pen Line Replacement (CJV)
This machine can be used with the following pen lines.
• Pen line rubber
Used for pen writing or cutting
• Pen line sponge
Used for half cut (cutting across a dotted line)
To order replacement consumable items, contact your local dealer or our service office. For more information
on consumable items, refer to our website. https://mimaki.com/supply/inkjet.html
1
Open the front cover.
2
Use tweezers to peel off the end of the pen line.
• Wipe off any adhesive remaining in the platen slot with alcohol.

MIMAKI JV330 Series Specifications

General

Brand	MIMAKI
Model	JV330 Series
Category	Printer
Language	English